1、The laying of the floor should be carried out after the completion of indoor civil engineering and decoration construction;

   3、The usable space under the floor, layout and laying of cables, circuits, waterways, air ducts, and air conditioning systems should be completed before installing the floor;

   5、The construction site is equipped with 220V/50HZ power supply and water source.

  二、Floor installation and laying tools

  2、Laser level measuring instrument and network laser scanner;

  4、Plate suction device, nut adjustment handle, cross screwdriver;

   三、construction procedure

  2、Pull a horizontal line and snap the installation height of the floor onto the wall with ink lines to ensure that the laid floor is at the same level. Measure the indoor length, width, and select a reference position, and pop up a network grid of installation supports on the ground to ensure neat and beautiful laying, while minimizing floor cutting as much as possible;

  4、Fix the truss beam to the support with installation screws, and calibrate the truss beam one by one with a horizontal ruler and a square ruler, so that it is both in the same plane and perpendicular to each other;

  6、If the remaining size near the wall is less than the length of the raised floor, the method of cutting the floor can be used for patching;

  8、When installing heavy equipment in the computer room, supports can be installed under the floor of the equipment base to prevent floor deformation;

 Jiangsu Zhongtian anti-static flooring main products: Jiangsu OA network flooring, Jiangsu PVC anti-static activity flooring, Jiangsu anti-static flooring, Jiangsu all steel ventilation and anti-static flooring, computer room and office building flooring, all steel anti-static flooring, all steel anti-static network flooring, aluminum alloy anti-static ventilation flooring. Welcome to inquire and contact us at 13951819913.